CRC SmartWasher SW-23 - Page 6

Issue: Machine Does Not Heat (Part 1)
Step InstructionsProcess
Checkthe OzzyJuice®levelto ensure its abovethe screw onthe probe.
A
If not, addmoreOzzyJuice® andcheck forthe light to go out.
Oncethe light has gone out, allow2-3hours forthe machineto heat back
up.
B
Step 1
Isthe REDADDfluidlighton?
If notcontinue to step 3
Step InstructionsProcess
Re-check the fluid level is above the probescrew. If not, addmore
OzzyJuice® until above screw.
A
If the Red light still stayson, replacethe temperature probe.
B
Model
SW-37SW-28 / XESW-25SW-23Part
1005067 /
14793
1005065 /
14791
1005065 /
14791
1005065 /
14791
Probe
CRC Spare Part Numbers
Step 2
6
Isthe RED ADDfluidlight still on?
Tip: “Red light is found on the control box
on the side of the machine”.