CRC SmartWasher SW-23 - Transport and Storage; Transport Guidelines; Storage Recommendations

Issue: Machine Does Not Heat (Part 2)
Process StepsProcess
Check the flash patternof the TEMPLED.
A
If the TEMPLED is flashingrapidly (fasterthanPOWER LED) = replacethe probe.
B1
If the TEMPLED is flashingthe samerateas the POWERLED andthe HEATERLED
is off andthe fluidis cold =replacethe probe.
B2
If the HEATERLED is on solid, goto step 4.
B3
Step 3
7
Removethe four or six Phillips head
screws onthe control box lid.
Model
SW-37SW-28 / XESW-25SW-23Part
1005067 /
14793
1005065 /
14791
1005065 /
14791
1005065 /
14791
Probe
CRCSparePart Numbers