Smartwasher SW-37
Operating Manual
|
3
Safety Instructions
BE SAFE
When using your SmartWasher
®
, basic safety precautions should always be followed,
including the following:•
Please read this instruction manual carefully and completely to
ensure that your new SmartWasher
®
will operate at its maximum
eectiveness.
1. Care must be taken as burns can occur from touching
hot parts.
2. Do not operate SmartWasher
®
with a damaged cord or if
the equipment has been dropped or damaged until it has
been examined by a qualied service person.
3. Do not let a cord hang over the edge of the table, bench,
or counter or come in contact with hot manifolds or moving
fan blades.
4. If an extension cord is necessary, a cord with a current rating
equal to or more than that of the equipment should be used.
Cords rated for current lower than the equipment may over
heat. Care should be taken to arrange the cord so that it
will not be tripped over or pulled. (Must be rated a minimum
of 5A/220V)
5. Unplug equipment from electrical outlet when not in use for
an extended period of time. Never use the cord to pull the
plug from the outlet. Grasp plug and pull to disconnect.
6. To reduce the risk of re, do not operate equipment in the
vicinity of open containers of ammable liquids (gasoline).
7. Adequate ventilation should be provided when working on
operating internal combustion engines.
8. Keep hair, loose clothing, ngers, and all parts of body away
from moving parts.
9. To reduce the risk of electric shock, do not use on wet
surfaces or expose to rain.
10. Use SmartWasher
®
only as described in this manual.
Use only attachments and parts recommended by CRC
Industries NZ.
11. ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses
only have impact resistant lenses, they are not
safety glasses.
12. It is good practice to wear gloves whenever using industrial
cleaning uids.
For technical support visit our we
bsite www.crcind.com.au/smartwasher or call us on 1800 224 227
To Next Page
Loading...
Need help?
General
