● Device Connection Function : Used to display the connection status of the scanner, with
red frame indicating disconnection and green frame indicating a connected device. Users can click
on this area to view the version of firmware(FW).
● Configuration Function : In this area, users can access the
scanning configuration options and view the current selection. Clicking on it will expand and show
specific configurations for selection. Refer to the configuration description for more information.
● Start Scanning Function : Used to initiate scanning based on the
parameters set in the scanning configuration function. Please ensure that the scanner is connected
and has sufficient storage space before starting the scan.
Model List：
Sharing Function : The sharing function of the model list supports three sharing ways: model,
project and video. Sharing projects and sharing videos is only supported on homepage list.
Sharing models and sharing projects supports compressing the corresponding model results or
project data and then sharing them with other apps. After sharing project to the PC, unzip it to get the
AlgoDir folder, then refer to “Importing historical projects”of “8. Guide for Windows & Mac Software”
and using PC for better model processing.
To share video, you need to adjust the model to a suitable posture. The model rotates 360° around
the dotted line to generate a video, which supports sharing to other apps in the form of file sharing.
Firmware Upgrade：
To Next Page
Loading...
Need help?
General
