Troubleshooting Guide
故障排除指南
1. The washing machine does not run
①The power connection is poor, unplug the power cord, and then plug it
in again.
②The UV protection cover is not covered. Put the UV protection cover
on and try again.
2. During the washing process, the stirring fan in the washing
container does not rotate
①The stirring fan in the washing container is blocked by foreign objects
and does not move. After the power is turned off, pour out the alcohol,
remove the foreign objects and power on and clean again.
②The sediment at the bottom of the washing container is too viscous,
which affects the normal rotation of the motor.
3. Abnormal noise occurs during the operation of the washing
machine
①The ground where the washing machine is placed is not level enough.
②The motor bearing is out of oil. Need to inject ordinary butter into the
oil injection hole of the motor.
③The screw of the mixing fan in the barrel is loose, and it makes
abnormal noise when rotating during the washing process. Reinforce the
mixing fan in the barrel with a screwdriver.
4. The model turns white after washing and curing
①The concentration of alcohol used for washing is not pure. Need to
use more than 95% alcohol for washing.
②If the alcohol on the surface of the model solidifies without air drying,
whitening will appear. The alcohol on the surface of the model should be
allowed to dry before curing.
5. Press the mode switch button of the washing machine, the two
mode lights are off
Please try again or restart the machine.
14
To Next Page
Loading...
General