Create Room Cubby - Step 5: Attach the Lid

4
Side 1
Locate your Lid. With bottom side up, push posts and connceting bolts into place, as indicated below.
5
x6
Cams
x2
Connecting
Bolts
Connect the top piece to the left and
right panel by lining up the posts and
dowels with the corresponding holes
and tapping firmly into place.
Once connected, use your screw driver
to gently turn cams on Lid 220 degrees
clockwise to lock into position.
Back Panel
Side 2
Side 1
Base
Lid
Lid
(underneath)