Create Room DREAMBOX - Right Side Box Assembly

16
RB Base
Wheel
Bolts (16)
Wheel
Nuts (16)
Right Side Box Shown.
Build on a blanket for best results
RB2
2
Green dowel
Post hole
Locking
Cam hole
Unnished edge
Pre-drilled
Wheel Bolt
holes
Pre-drilled
angle bracket
holes
Divider
screw
hole
Install (2) Base Support Pins and (3) Posts
into bottom end of Side 2 as shown. Install
another (3) Posts into top end of Side 2.
3
TOP
BOTTOM
Proprietary, patented product and assembly instructions. Do not copy or distribute.
Locking
Cams (6)
1
*Do not overtighten screws (wheels should spin freely)
Posts (3)
Base Support
Pins (2)
With finished edges of RB base
and RB lid facing down, match
up posts with post holes in
RB Side 2. Push base and lid into
Side 2.
Push (16) Wheel Bolts into the top
of the base. Install (4) Caster Wheels
onto bolts. Secure with (16) Wheel Nuts
using 10mm wrench or drill with
socket wrench extension.
Insert (6) Locking Cams in holes on box.
RB Base
RB Lid
RB2