Create AIR PURE COMPACT - Wireless Charging; Change the Hepa Filter; Cleaning and Maintenance

11
ENGLISH
WIRELESS CHARGING
CHANGE THE HEPA FILTER
CLEANING AND MAINTENANCE
• This product is a mobile phone wireless charging accessory product and supports An-
droid and iPhone mobile phone wireless charging.
Note: When using, please lay the wireless receiving position of the back shell of the mobile
phone on the launch plane of the product, and slightly move the mobile phone until the
mobile phone automatically displays the charging icon.
• Tip: Please pull out power supply before changing.
• The system automatically memorizes the 600 - hour countdown when the machine is pow-
ered on for the rst time. When the lter screen expires, the display screen will show
“600” every time you use it. The buzzer will sound 5 times while ashing 5 times slowly
to remind the user that the lter screen needs to be replaced.
• Initialize the lter after its replacement: Press the auto key for 3 seconds in standby
mode, and the display will ash “600” slowly, then press the timing key for 3 seconds and
the display will show “000”. After the buzzer sounds, the system will start automatically,
that is, the lter screen will be replaced successfully.
• The system recollects another 600 - hour countdown. (Please kindly note that when you
replace the lter, you can refer to the maintenance of lter.)
ATTENTION: To protect our environment, please replace lter after service time is up.
• Please pay attention: If you replace the lter earlier than service time expiration but
without setting 600-hour memory countdown function, the system will ignore the new
lter’s service time, instead of it, the system will continue to count down service time
based on the previous lter.
• The shell life of lter is about 4-6 months.
• When replacing the lter, please purchase replacement lters through a formal channel.
• Due to environmental pollution is not the same in each region, we advise every month to
check the lter at least once. For healthy purpose, please replace it immediately when
lter is dirty.
• Daily cleaning focus on the surface of the air purier as well as the air inlet and outlet.
• When cleaning, use soft dry cloth to wipe dust.
• When using a wet cloth, it needs to be wrung out before using it to clean the air purier.
Don’t leave any water-based stains on product.
WARNING: Pull out the plugs before cleaning the surface of the air purier.
• Do not put the air purier into water and any other liquid. Water or liquids can not sprinkle on
the air purier directly.
• Do not use corrosive or ammable cleaners to clean any parts of the air purier.