What to do if my Create Dehumidifier doesn’t operate?
If your Create Dehumidifier isn’t operating, consider these potential causes: * **Power Cord:** Ensure the power cord is securely plugged into the outlet. * **Full Tank:** If the tank full indicator is blinking, empty the water tank and reposition it correctly. * **Temperature:** Check if the room temperature is within the range of 5°C to 35°C.
Why is my Create Dryplus XL-Spiral operation noisy?
If your Create Dehumidifier is operating noisily, here are a couple of things to check: 1. **Position:** Make sure the unit is on a stable, sturdy surface and not tilted. 2. **Air Filter:** A clogged air filter can cause noise. Clean the air filter as instructed.
Why isn’t my Create Dehumidifier dehumidifying?
If the dehumidifying function of your Create Dehumidifier isn’t working, check the following: * **Air Filter:** A clogged air filter can impede performance. Clean it as instructed. * **Airflow:** Ensure that neither the intake nor the discharge duct is blocked. Remove any obstructions.
Removes moisture from the air to decrease humidity level.
Compact and lightweight unit with casters for easy movement.
Unit may stop to defrost at low temperatures.
Allows adjustment of desired humidity level.
Programs the unit to turn on and off automatically.
Operates with a low noise level.
The unit has low power consumption.
Explains indicators for room humidity, selected humidity, and time.
Describes the defrost indicator turning orange when active.
Instructions for turning the unit on and off.
Activates a lock on all other buttons.
Adjusting fan speed for high, low, or sleep mode.
Setting the desired humidity level from 40% to 80%.
Steps to remove and empty the water tank.
Important notes on float removal, cleaning, and tank reinsertion.
Wipe the unit with a soft damp cloth.
Instructions for cleaning the air filter using vacuum or washing.
Ensuring the area is safe and ventilated before maintenance.
Instructing personnel and sectioning off the workspace.
Using detectors to check for flammable atmospheres.
Ensuring fire extinguishing equipment is available.
Prohibiting ignition sources in the work area.
Ensuring adequate ventilation during work.
Verifying components fit specifications and ventilation is clear.
Performing safety checks on electrical components.
Disconnecting power and checking seals during repairs.
Guidelines for working on live intrinsically safe components.
Checking cabling for wear and adverse environmental effects.
Prohibiting ignition sources during leak detection.
Acceptable methods for detecting leaks in flammable refrigerant systems.
Procedures for removing and evacuating refrigerant from the system.
Requirements for charging the system with refrigerant.
Steps for safely decommissioning the equipment and recovering refrigerant.
Labeling requirements for decommissioned equipment.
Procedures for safely recovering refrigerant.
Transport regulations determined by local authorities.
Referencing national regulations for disposal.
Protection requirements for storing unsold equipment.
General| Brand | Create |
|---|---|
| Model | Dryplus XL-Spiral |
| Category | Dehumidifier |
| Language | English |
To Next Page
