How to fix a noisy Create Dryzone XL-Cubic Dehumidifier?
If your Create Dehumidifier is operating noisily, it might be due to a couple of reasons. Check if the unit is on a stable, sturdy surface; if not, move it to a better location. Also, a clogged air filter can cause noise, so clean the air filter following the instructions in the manual section about cleaning.
Why my Create Dehumidifier doesn't turn on?
If your Create Dehumidifier isn't turning on, there could be a few reasons. First, ensure the power cord is properly plugged into the outlet. Second, check if the tank full indicator is blinking, which means the drainage tank is either full or not correctly positioned; empty the tank and replace it properly. Also, the unit might not operate if the room temperature is above 35°C or below 5°C.
What to do if the Create Dryzone XL-Cubic is not dehumidifying?
If the dehumidifying function of your Create Dehumidifier isn’t working, check if the air filter is clogged and clean it as instructed in the "Cleaning the dehumidifier" section. Also, make sure that neither the intake nor the discharge duct is obstructed; if they are, remove the obstruction.
Why is no air coming out of my Create Dryzone XL-Cubic?
If your Create Dehumidifier isn't discharging air, the air filter might be clogged. Clean the air filter as instructed in the "Cleaning the dehumidifier" section.
General| Dimensions | 350 x 245 x 510 mm |
|---|---|
| Dehumidifying Capacity | 20L/day (30°C RH80%) |
| Water Tank Capacity | 4 liters |
| Dehumidification Capacity | 20L/day (30°C RH80%) |
| Tank Capacity | 4 liters |
| Operating Temperature Range | 5°C to 35°C |
To Next Page
