EasyManua.ls Logo

Create Thera Matic Touch - Page 10

Create Thera Matic Touch
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
ENGLISH
This coffee maker has the functions of: single cup espresso, double cup espresso, American
coffee, hot water, steam, manual cleaning and bean emptying.
IMPORTANT: This appliance automatically performs cleaning each time it is turned on to
prepare for operation.
NOTE: Coffee will come out drop by drop at the beginning (2-3 seconds after brewing starts)
and at the end (6-8 seconds before brewing is completed) during the brewing process, this
is normal.
POWER ON AND PREHEATING
1. Plug the device into the power outlet and press the power button on the back of the ma-
chine.
2. All indicator lights on the screen will ash for 1 second and then turn off when the self-
test is completed, then the device will enter sleep status.
NOTE: Whenever you are going to use the coffee maker, remember to place a container on
top of the drip tray, below the coffee spout.
3. Tap the screen in sleep state, power button
ashes for 10 seconds. Press the power
button for 3 seconds and the appliance will enter the preheating state.
NOTE: Please refer to the “TROUBLESHOOTING” section to operate if a warning occurs.
4. The self-cleaning indicator
will light steadily and the power indicator will ash, then
the appliance will enter the preheating stage and start automatic cleaning.
5. Once the preheating of the coffee maker is completed, the single cup espresso, double
cup espresso, American coffee, hot water, steam, manual cleaning and bean emptying in-
dicators will light steadily and the coffee maker will enter the standby state to start. to
prepare your coffee.
HOW TO USE
NOTE: The drip tray collects water from the dispensing spout during each rinse and
self-cleaning, as well as any coffee that might spill during brewing. Clean and empty the
drip tray every day.
12. Fill the bean container with the appropriate amount of fresh coffee beans, maximum
200g, then close the bean container lid.
CAUTION: If the grinding blade is removed, make sure the blade has been installed in its
correct position before lling the bean box, if not installed correctly the coffee grinding
will not work.
After completing these steps, you will have your coffee maker ready to start using.

Related product manuals