Create Thera Matic Touch - Page 11

11
ENGLISH
SINGLE CUP ESPRESSO
DOUBLE CUP ESPRESSO
AMERICAN COFFEE
WATER TANK FILLING WARNING
1. Place a coffee container under the coffee spout.
2. Press the single cup espresso button
and the device will begin to prepare the espresso
coffee. The indicator light will illuminate during the process of brewing a single cup of
espresso.
3. After nishing making espresso, the appliance will automatically enter standby mode.
4. During coffee extraction you can press the single cup espresso button
again and the
machine will stop extracting coffee.
1. Place a coffee container under the coffee spout.
2. Press the double cup espresso button
and the device will begin to prepare a double cup
of espresso. The indicator light will illuminate during the coffee brewing process.
NOTE: Double-cup espresso is achieved by brewing two cycles of single-cup espresso con-
tinuously, do not remove the coffee container during the brewing process.
3. After nishing making a two-cup espresso, the appliance will automatically enter standby
mode.
4. During coffee extraction you can press the double cup espresso button
again and the
machine will stop extracting coffee.
1. Place a coffee container under the coffee spout.
2. Press the American coffee button
and the device will begin to prepare coffee. The
American coffee indicator will illuminate during the coffee brewing process.
3. After nishing making American coffee, the appliance will enter standby mode automat-
ically.
4. During coffee extraction you can press the American coffee button
and the machine
will stop extracting coffee.
• During the process of preparing any type of coffee, when the water tank needs to be re-
lled, the hot water icon
will ash and the low water indicator will light steadily.
• Fill the tank with water without exceeding the maximum measurement. Then press the hot
water icon
to release pressure before brewing coffee again.
Note: When releasing pressure, a container should be placed under the steam wand to col-
lect the steam dispensed from the wand and prevent burns. After the pressure is released,
continue brewing coffee.
• If you need to make coffee immediately after completing the steam function, you need to
reduce the temperature of the boiler, at which time, hot water and steam will be drained
into the waste storage tray. After reducing the boiler temperature you can prepare coffee.