Create Warm Wall - Temperature Selection; Weekly Timer Setting; Mode Selection

9
ENGLISH
• Press the mode selection button to access the mode you want.
• When you press the button
, the heating mode works in a continuous cycle as follows:
• After connecting the heater, when the display shows the temperature, press the increase
buttons
or decrease to adjust the temperature you want.
• To modify the temperature in the different modes, you will have to rst select the mode you
want and then select the desired temperature.
• In Comfort Mode the temperature can be adjusted between 5-35ºC.
• In ECO Mode the temperature can be adjusted between 1-31ºC.
1. Press the timer button
for 3 seconds to access the clock and day of the week settings.
2. The screen will show “
“then press the increase buttons or decrease to select the
day of the week (1-7).
TEMPERATURE SELECTION
WEEKLY TIMER SETTING
MODE SELECTION
1 Monday
2 Tuesday
3 Wednesday
4 Thursday
5 Friday
6 Saturday
7 Sunday
3. Press the timer button
to conrm the day setting and enter the clock time setting, the
display will show . Press the increase buttons or decrease to set the current time.
4. Press the timer button again
to conrm the hour setting and enter the minute setting,
the display will show . Press the increase buttons or decrease to set the current
minute.
5. Finally press the timer button
to conrm all selected settings.
Note: The clock and calendar will be reset to factory defaults if the device is turned off or
the light is not on.