Changing the Modes
9
Scenery Observation
In the observing (photo shooting) mode, aim the objects which need to be
observed, look at the screen from Eyecup #8. And adjust the objective focus
wheel #4 to get the sharpest image.
Automatic fine-tuning control is operated by the viewer according to the
average brightness of scenery centrally.
The digital zoom will turn on by pressing #12 and #15 and ranges from 1X to
8X.
If the light resource is enough, turn OFF the auxiliary IR light to save Power.
If there is no external light, turn ON the auxiliary IR light and adjust the
brightness to make the observation easier.
At this time, adjust the IR LED focus wheel #2 and objective focus wheel
#4 to get sharper images.
Icons Description
1 - Current mode(Photo shooting)
2 - Image Capacity Remaining
3 - magnification range
4 - TF card in
5 - Battery charge indicator
6 - System time
6
Picture 1
1 2 3 4 5
To Next Page
Loading...