Need help?Do you have a question about the Creative Sound Blaster ZxR and is the answer not in the manual?
General| Internal | Yes |
|---|---|
| Audio quality | 24 bit |
| Frequency range | 10 - 45000 Hz |
| Audio output channels | 5.1 channels |
| Digital-to-Analog Conversion (DAC) | 24-bit/192kHz |
| Line-out Signal-to-Noise Ratio (SNR) | 124 dB |
| Headphone outputs | 1 |
| Wireless connection | No |
| Bundled software | Sound Blaster Z-Series Control Panel\\r SBX Pro Studio\\r CrystalVoice\\r Scout Mode\\r Speakers / Headphone Calibration\\r Cinematic\\r Mixer\\r Equalizer\\r Advanced Features\\r EAX Advanced HD\\r OpenAL\\r Creative Alchemy\\r Creative Diagnostics |
| Minimum RAM | 1024 MB |
| Minimum processor | 2.2 GHz |
| Volume control | Rotary |
| Minimum storage drive space | 600 MB |
| Cables included | Audio (3.5mm), S/PDIF |
| Dolby technologies | Dolby Digital DTS Connect, Dolby Digital Live |
Lists the minimum hardware and software requirements for the audio card.
Lists extra requirements like DVD drives and 5.1 speakers for specific features.
Explains how to use the automated system for updating software and drivers.
Details the jacks and connectors on the main audio card (SB1510 Main Board).
Describes the DBpro daughter board and its connectors for optical and RCA inputs/outputs.
Details the external ACM, its microphone, and I/O connections.
Explains how to connect different types of analog speaker systems.
Guides on connecting digital speaker systems via optical connections.
Instructions for connecting to home theater systems, usually via A/V receivers.
Details how to connect headphones and headsets to the device.
Provides recommendations for optimal 5.1 channel speaker placement.
Illustrates connection for 2.1 channel analog speaker systems.
Details the connections for 5.1 channel analog speaker systems.
Shows how to connect digital speakers using optical connections.
Guides connecting an A/V receiver to the audio card via optical cable.
Explains connecting to A/V receivers via RCA line-level inputs.
Details connecting to A/V receiver's rear L/R jacks using 3.5mm cables.
Shows connecting to A/V receiver's center/subwoofer jacks using 3.5mm cables.
Instructions for connecting standard headphones to the audio card.
Instructions for connecting headsets with microphones.
Details how to connect the external Audio Control Module to the main card.
Explains connecting headphones/headsets to the Audio Control Module.
Step-by-step guide for removing software and drivers from Windows 7 and 8.
Specific instructions for uninstalling the Dolby Digital Live pack.
Steps to uninstall the DTS Connect pack.
How the audio card enhances gaming experiences with SBX Pro Studio.
Explains the CrystalVoice technology for clear voice communication.
Details EAX ADVANCED HD for immersive 3D audio effects in games.
Describes Creative Alchemy for restoring 3D audio effects in older games.
Guides on connecting external devices for music playback/recording.
Lists the software applications included with the audio card.
Mentions additional bonus applications available online.
How to create, save, and manage user profiles in the control panel.
Instructions for exporting and importing custom settings.
How to set a custom avatar for profiles.
Explains how to enable/disable individual SBX Pro Studio features.
How to adjust the intensity of SBX Pro Studio effects.
How to use the audio test to verify enhancements.
Guide on using CrystalVoice enhancements for voice communication.
Explains Scout Mode for enhanced hearing in games.
Setting up speaker or headphone configurations.
Selecting headphone gain (Normal or High).
Setting high gain as the default for headphones.
Options to enable/disable Dolby Digital Live or DTS Connect encoders.
Adjusting playback and recording volumes for inputs/outputs.
Details on using volume sliders and mute/unmute functions.
Applying pre-defined equalizer presets to audio.
Adjusting and saving custom equalizer settings.
Enabling stereo mix to be channeled to digital output.
How the device enhances gaming with SBX Pro Studio.
How to restore 3D audio effects for games using Creative Alchemy.
Configuring speaker systems and conducting sound tests.
Adjusting bass redirection and subwoofer gain.
Lists the various SBX Pro Studio technologies.
Lists the various CrystalVoice technologies.
Details on analog-to-digital and digital-to-analog conversion quality.
Solutions for issues like popping noises during playback.
Troubleshooting for enabling Dolby Digital Live or DTS Connect.
Steps to troubleshoot no sound from headphones.
Troubleshooting no audio output for digital files.
To Next Page