EasyManua.ls Logo

Creative Sound BlasterX Katana - Technical Specification

Creative Sound BlasterX Katana
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Technical Specification
Product Name: SoundBlasterX Katana
Model Number: MF8245
Bluetooth® Version: Bluetooth 4.2
Operating Frequency: 2402 - 2480 MHz
Total power: 75W (RMS)
Energy Saving Information
Power consumption
- Standby/Off : < 0.5 W
- Networked Standby : < 3 W (Bluetooth)
< 3 W (USB)
< 3 W (Optical)
< 3 W (all network ports activated)
Power Management
- Power consumption < 0.5W after 28 hours inactivity when all network ports are deactivated / disconnected
- Networked standby within 20 minutes inactivity (Bluetooth, USB, Optical)
Activation & deactivation of wireless network port(s)
- To activate, perform Bluetooth device pairing
- To deactivate, disconnect Bluetooth from external device providing the audio source
Power Adapter Information
Operating Temperature range: 0ºC to 45ºC
Supported Bluetooth profiles*:
A2DP (Wireless Stereo Bluetooth), AVRCP (Bluetooth Remote Control)
Supported Codec: SBC, AAC
Operating Range: Up to 10 meters, measured in open space.
RF Output Power: < 4 dBm
Walls and structures may affect range of device.
Supports USB flash drives up to 128GB in FAT16/FAT32/exFAT format
Supported audio formats: MP3, WMA, FLAC and WAV (16 bit 48Khz PCM)
Support Mp3 and WMA up to 320kbps.
Does not support WMA Pro / Lossless
Support FLAC up to 1.3Mbps.
Support USB Audio up to 24 bit / 96 Khz
Support Optical Input up to 24 bit / 96 Khz, Dolby Digital
PC App Compatible with Windows 7/8/8.1/10
Note: Compliance markings are located on the bottom of this product.
Model Number: DYS602-220250W
Input: 100-240VAC 50/60Hz
Output: 22VDC 2.5A

Related product manuals