10
Clearing Your Headset’s Pairings
1. Make sure that your headset is turned off. If it is turned on, press and hold the
Multi-function button until you hear a beep and the Tri-color LED turns off.
2. Press and hold one of the Volume buttons for 20 seconds. The Tri-color LED
alternately blinks red and green.
3. Release the Volume button.
4. Press one of the Volume buttons again until you hear two beeps.
5. Charge your headset for a few seconds. Your headset automatically turns off and
returns to its default settings. All current pairings are cleared.
Wireless Bluetooth headset.fm Page 10 Monday, August 23, 2004 6:40 PM
To Next Page
Loading...
