EasyManua.ls Logo

Creative WP-250 - Page 4

Creative WP-250
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Light
Indicator
Function
5. Light
indicator
Blue and blinks slowly: connected to a
paired device.
Blue and blinks rapidly: in pairing mode
and is ready to pair with a new device.
Red and blinks slowly: low battery level,
charge the headset soonest. This is
accompanied by a beep tone every 2
minutes.
Red: charging headset.
Connector /
Port
Function
6.
Micro-USB
charging
connector
Use the supplied USB cable for charging
the headset via a laptop or computer.
7.Invisible
Microphone
Noise suppression microphone for crystal
clear communications
Technical Specifications:
Driver: 13.5mm Neodymium magnet
Frequency Response: 20Hz ~20kHz
Impedance: 32ohms
Wireless Technology:
Bluetooth
2.1 + EDR
(Enhanced Data Rate)
Bluetooth
Profiles: A2DP (Wireless stereo
Bluetooth
),
AVRCP (
Bluetooth
remote control), HFP (Hands-free
profile), HSP (Headset profile)
Audio Codec: SBC, FastStream
Operating Frequency: 2402 ~ 2480MHz
Operating Range: Up to 10m / 33ft
Power Supply: Rechargeable Lithium Ion battery, 3.7V,
180mAh
Charge via USB: 5VDC, 500mA
Charge / Playback / Talk time: 2 hours / 8 hours / 9 hours
Net Weight: 32g / 1.1oz

Other manuals for Creative WP-250

Related product manuals