Using Your Wireless Features 19
To activate saved receivers only
Below is an example of how you can save your favorite combination of
receivers (for example, X-Fi Wireless Receivers 1 and 3) and activate them
later using the Zone button.
1 Activate X-Fi Wireless Receivers 1 and 3, as shown in “To activate selected
receivers” on page 18.
2 Press the Broadcast button on your transmitter remote control. Music
plays from all receivers.
3 Press the Zone button on your transmitter remote control to activate X-
Fi Wireless Receivers 1 and 3 only.
4 To deactivate X-Fi Wireless Receivers 1 and 3, press the Zone button again.
NOTES
Your transmitter can only save and reactivate one combination of
receivers.
To Next Page
Loading...