Creative ZiiSound D5x - Reset to Factory Setting; Clear Link System

B
20
**FortheZiiSoundD5x,PoweredONisindicatedwiththeVolumeLEDStatusIndicatorlitup.
Restoring LINK for linked speaker usage
TorestoretheLINKfromthesetsofindividualspeakers,youcanPresstheLINKTouchpad/But-
tononceoneitheranyofthespeakerswithallotherD5x(s)andsubwooferPoweredON**.This
willresultinrestoringthestateofthespeakersshownbyitLEDindicationineitherMulti-channel
or Party mode.
4.3
Reset to factory setting / clear Link system
FollowthesestepstoreturntofactorysettingsallD5x(s)toclear Bluetooth paired device memory
andLinksystemmemorywhenachangeofspeakercongurationisrequired(Forexample,linking
additionalD5xorDSx)
Note:TheabovecanalsobeappliedtoLEFTandCENTERspeakertoclear Bluetooth paireddevicememoryandLinkcongurations
should the need arise.
Action LED status Status
Transmitter
DisconnecttheTransmitter
Press and hold the Pairing Button while
insertingtheTransmittertoiPhone/iPodand
holdfor8seconds
TransmitterLED
fastblinks
Transmitterhasbeenreset
and is in pairing mode
ZiiSound D5x
ReturnthespeakertoStandbybypressingthe
Power ON/ Standby button.
PressandholdPowerbuttonfor10seconds.
CONNECTLEDandLINK
LEDblinkstwiceand
turnsoff.Thisindicatesa
successful Factory reset.
PoweredOn.Speaker
Bluetooth device list and
Linksystemmemory
cleared.Readyfornextuser
action.