CREE LIGHTING CONNECTED MAX Installation Instructions

LPN00838X0003A0_A
1 of 3
Connected Max In Wall Dimmer for use
with Connected Max Lamps
Includes: CMACC-CMWD-UNV-WH
INSTALLATION INSTRUCTIONS
INSTRUCTIONS D’INSTALLATION
IMPORTANT SAFEGUARDS
When using electrical equipment, basic safety precautions should
always be followed including the following:
READ AND FOLLOW ALL
SAFETY INSTRUCTIONS
1. Before installing wall controls turn off the power at the circuit
breaker.
Couper l’alimentation avant l’installation
2. These wall controls must be installed in accordance with the
national and local building codes and electrical wiring codes
including wiring methods and wiring connections. If you are not
familiar with these codes and requirements, consult a qualied
electrician.
Ce produit doit être installé conformément à NEC ou votre code
électrique local. Si vous n’êtes pas familier avec ces codes et ces
exigences, veuillez contacter un électricien qualié.
3. Indoor use only and suitable for damp locations.
Pour usage interieur seulement et convient aux emplacements
humides.
4. Any changes or modications to these devices not explicitly
approved by manufacturer could void your authority to operate this
equipment.
SAVE THESE INSTRUCTIONS
FOR FUTURE REFERENCE
120-277VAC
60Hz XX
APPLIANCE
CONTROLS
18AWG Cu wire
Made
in China
TOP
CMACC-CMWD
5NW1
In Wall Dimmer
CMACC-CMWD-UNV-WH
UNIT DESCRIPTION
The Connected Max In Wall Dimmer for use with Connected Max Lamps. The Connected Max In Wall Dimmer provides on, off, dimming control, and color
adjustment.
LOAD TYPES
Connected Max In Wall Dimmer supports Connected Max LED light bulbs only.
BOX CONTENTS:
• Smart In-Wall Dimmer + Tunable Controller
• (3) Wire Nuts
• (2) Screws
• User Manual
Wall plate not included
Works in a single-pole setup only and requires a neutral wire.
• Voltage: 120-277V, 60Hz
• Depth in Wall: 1.5"
• For ease of installation, Cree recommends the use of a deep wall
box.
• NOT FOR USE WITH METALLIC FACEPLATES.
• Type 1 enclosure & IP20 Indoor use
• Operating Temperature limit of the control: 0 to 35C
• Panel function for Cree Connected Bulb with Connected Max LED
light bulbs
• Pollution degree 2 Suitable for normal household air circulation
• Rated impulse voltage: 4000 V

CREE LIGHTING CONNECTED MAX Specifications

General

Brand	Cree Lighting
Product Name	Connected Max
Category	Lighting Equipment
Voltage	120V
Operating Temperature	-20°C to 40°C
Type	LED
Connectivity	Wireless
Dimming	Yes
Control Options	Voice
Warranty	5 years