Creek Audio OBH-15 Mk2 User Manual

Explains the OBH-15 Mk2's purpose: boosting phono cartridge signals for amplifiers.

Guides on connecting the turntable to the OBH-15 Mk2 and the unit to the amplifier.

Discusses the unit's ability to drive long cables and its output level relative to other sources.

Identifies the MC/MM inputs, Ground, Output, and power connection on the rear panel.

Details the DIP switch functions for MM/MC input selection, gain, and loading options.

Instructions for MM cartridges, including connection, gain, and capacitance settings.

Instructions for MC cartridges, including input, gain, resistance, and capacitance settings.

Explains configuration for High Output MC cartridges, often using the MM input.

Guides on achieving MC gains (60-80dB) by combining stage gains.

Advises against excessively high gain to maintain headroom and prevent distortion.

Describes the rumble filter's purpose and how to activate it via switches 5 & 6.

Explains the ground terminal and the 24V DC power supply unit requirements.

Crucial warnings on connecting/disconnecting and volume adjustments during operation.

Details THD+noise, Signal to Noise, Channel Separation, and Overload Margin.

Lists maximum output level, output impedance, and available gain settings.

Provides recommended cartridge matching values, unit dimensions, weight, and power consumption.

Outlines the warranty coverage, validity, and limitations within the UK.

Guides for obtaining service and support for Creek products outside the United Kingdom.