Cremesso UNA Automatic - 16 Cleaning and Maintenance; Machine and Piping Rinse

9
any doubt, have the electrical installation tested by
a qualied electrician.
X
Do not connect the machine to the mains
electricity supply with an extension lead or
multiple socket.
X
Use the machine only at ambient temperatures
between +16°C and +38°C.
X
Only use genuine original accessories and spare
parts. Using accessories or spare parts from other
manufacturers will invalidate the guarantee and
product warranty liability.
Requirements for cleaning
X
Withdraw the power plug and allow the machine
to cool down completely before re-positioning it,
cleaning it or carrying out maintenance work.
X
Never immerse the machine completely or
partially in water or any other liquid.
X
Never hold the machine under running water.
X
Use only clean cleaning materials to clean the
machine.
X
Do not use strong cleaning detergents or solvents.
X
Use a soft, damp cloth to clean the surface of the
machine.
EN
X
Only use cleaning and descaling agents
recommended by the manufacturer. Avoid contact
with eyes, skin and other surfaces.
Residual risks
Risk of injury from electric shock
X
Ensure that the power supply cable is not pinched
and does not rub against sharp edges.
X
Never touch the power plug with wet hands.
X
If you want to pull the plug from the power outlet,
always pull directly on the plug. Never pull on the
cable.
X
Damaged power cables must be replaced
immediately and only by the customer service
centre.
Risk of injury from sharp edges and crushing
X
Close the lever before operating. Do not open the
lever when the machine is in operation.
X
Do not put your nger into the capsule
compartment or capsule chute. Parts of the
machine can be pointed and sharp.
X
When closing the operating lever, do not reach
underneath it.