EasyManua.ls Logo

Crescent twist - Adjusting the Footrest; Using the Brakes; Fitting the Seat Unit; Using the Harness Buckles

Default Icon
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Adjusting the footrest
●Press the two buttons on the
footrest to adjust the footrestwith
two hands (Figure 3)
Using the brakes
Braking downward , Unbraking
upward (Figure 4)
4
3
6
Fitting the seat unit (parent facing and forward facing)
Pull up the seat release button ,take out the backrest and reverse , then
put the seat into joint holder(Figure 5,6)
Using the harness buckles as ( Figure 7,8)
6
5
8
7
Adjusting the footrest
●Press the two buttons on the
footrest to adjust the footrestwith
two hands (Figure 3)
Using the brakes
Braking downward , Unbraking
upward (Figure 4)
4
3
6
Fitting the seat unit (parent facing and forward facing)
Pull up the seat release button ,take out the backrest and reverse , then
put the seat into joint holder(Figure 5,6)
Using the harness buckles as ( Figure 7,8)
6
5
8
7
Adjusting the footrest
●Press the two buttons on the
footrest to adjust the footrestwith
two hands (Figure 3)
Using the brakes
Braking downward , Unbraking
upward (Figure 4)
4
3
6
Fitting the seat unit (parent facing and forward facing)
Pull up the seat release button ,take out the backrest and reverse , then
put the seat into joint holder(Figure 5,6)
Using the harness buckles as ( Figure 7,8)
6
5
8
7
instructions
Adjusting the footrest
• Press the two buttons on the footrest to
adjust the footrestwith two hands (Figure
3)
Fitting the seat unit (parent facing and forward facing)
• Pull up the seat release button, take out the backrest and reverse, then put the seat into
joint holder(Figure 5,6)
Using the harness buckles as ( Figure 7,8)
Using the brakes
• Braking downward, Unbraking upward
(Figure 4)

Related product manuals