Need help?Do you have a question about the Cress E1814 and is the answer not in the manual?
Instructions for inspecting the kiln upon delivery for any damage or loss.
Critical safety warnings and guidelines to observe before operating the kiln.
Guidelines for selecting a location and installing the kiln.
Details on voltage, amperage, and wiring requirements for the kiln.
Overview of the kiln's microprocessor-based programmable control.
Explanation of the purpose and operation of each key on the control pad.
How to configure settings, access information, and use control options.
General procedures for operating the kiln's control system.
How to use preprogrammed firing profiles based on cone numbers.
Details on the available preprogrammed firing speed profiles.
Instructions for creating and using custom firing profiles.
A list and explanation of error codes displayed by the control.
Interpretation of various messages shown on the kiln's control display.
Steps for preparing the kiln and shelves before loading ware.
Guidelines for properly placing ceramic ware for optimal firing.
Explanation of pyrometric cones for monitoring firing progress.
Step-by-step guide to running a firing cycle.
Specific safety advice related to operating the kiln during the firing process.
Steps to take after the firing cycle is completed and during cooling.
Tips and techniques for optimal firing outcomes.
Identifying common firing problems and their solutions.
Routine and periodic maintenance tasks to ensure kiln longevity.
Electrical schematics for the kiln's internal components.
Definitions of technical terms used in the manual.
Information on warranty coverage, limitations, and claims.
To Next Page
General