Need help?Do you have a question about the Cress ET28 and is the answer not in the manual?
Essential safety precautions to prevent hazards and ensure safe operation of the kiln.
Guidelines for safely positioning the kiln, including clearance and floor surface recommendations.
Details on voltage, amperage, and wiring necessary for safe and efficient kiln operation.
Explains the function of each key on the control touch pad for operation.
Covers selecting temperature units, accessing the cone table, and previewing programs.
Explains how to use preprogrammed firing patterns for different cone numbers.
Step-by-step guide to inputting cone number, speed, and hold time for automatic firing.
Instructions on initiating a programmed firing cycle and managing delay starts.
Lists common error codes and provides guidance for diagnosing and resolving kiln issues.
Identifies common problems like blotchy bisque, warped ware, and glaze issues.
To Next Page
General