P111-SROM20220812A
Service and Repair Operative Manual
LEONARDO
14
Leonardo
This manual is reserved for authorized Cressi-sub Service Centers. The repair, maintenance, overhaul, calibration, and any other operation performed on regulators must be done exclusively by trained
Cressi-sub Authorized Center personnel. Cressi-sub declines all responsibility for operations performed on regulators by anyone not authorized and specifically trained by Cressi-sub itself.
Removal of outer protective seal
Position the display downwards and insert the tip of a flathead
screwdriver into the slot at the top of the outer cover.
Lever, as shown in the picture
To Next Page
Loading...
