EasyManua.ls Logo

Cressi MC9 - Introduction; Main Components

Cressi MC9
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ENGLISH
37
Introduction
Congratulations! Continual research and evolution carried out at
our technical centres, together with Cressi-sub’ s usual reliability,
have led to the product you just purchased, which will allow you
to dive comfortably and safely for a long time.
All Cressi-sub regulators are certified for use up to 50 m/55 yd.
and some for use in cold water with temperatures < 10° C/50°F,
having got through the strict test at 4°C/39°F (+0 -2) prescribed
by the UNI EN 250:2000 according to the EC directive 89/686,
which sets the essential safety requisites of Individual Protection
Devices (DPI).
Main Components
Regulators’ main task is reducing the pressure of the compres-
sed air contained in the tank to the same level as the environ-
ment’ s, supplying breathable air when required by the diver.
They are composed of a “first stage”, working as main pressure
reducer and a “second stage” (kept in the diver’ s mouth), which
adjusts the pressure precisely to the same value as the environ-
ment’ s. The regulator is part – together with tank, valves and
sling – of a complete underwater breathing system, known as
“SCUBA” (Self Container Underwater Breathing Apparatus).
This handbook describes all models of Cressi-sub range, all rea-
lized in high quality materials to guarantee pleasant dives and
high performance, together with the easiest ways of use and-
maintenance. The instructions and directions found in this manual
are based on the most up-to-date information about the equip-
ment available before printing.
Cressi Sub reserves the right to make changes at any time.
NOTE: This handbook does not replace a diving training cour-
se! All Cressi-sub devices must be used by divers who have
attended regular courses held by certified trainers.
Using underwater devices without a licence or the necessary
technical training may be dangerous for the diver’ s safety and
life itself.
Besides, in order to guarantee the maximum safety, the devi-
ces must be serviced only by the producer or an authorized-
centre.
You can find your authorized Cressi-Sub center by
asking your dealer, or Cressi Sub S.p.A. itself (email:
info@cressi-sub.it).
WARNING: CRESSI-SUB DECLINE ANY RESPON-
SIBILITY FOR ANY SERVICING CARRIED OUT BY
UNAUTHORIZED PERSONNEL.
WARNING: SCUBA devices complying with EN
250:2000 standard must not be used by more
than a diver at the same time.
WARNING: in case the components of a SCUBA
are set and used by more than a diver at the same
time, their performance in cold water might not
satisfy the requisites prescribed by EN 250:2000
standard.
WARNING: In order to carry out a totally safe
dive, Cressi-sub recommend to use a tank supplied
with a valve featuring two separate outlet ports,
with which two complete regulatorsare to be con-
nected.
LIBRETTO EROGATORI CRESSI 2013 nero_Layout 1 11/07/13 11.11 Pagina 37

Related product manuals