Product Description
The Crest Audio PL4601 professional power amplifier is
designed to achieve unsurpassed sonic performance and long-
term reliability—even when operating under extreme stress—in
touring or fixed installation applications.
Absolute sonic accuracy is the hallmark of every Crest amplifier.
Bass is solid and defined to the limits of audibility, with ample
current reserves delivered by an “over-engineered” power supply
and advanced Class AB output circuit design. Wide-bandwidth
output devices assure detailed, transparent high frequency
response. And, thanks to Crest’s exclusive IGM circuit, the
PL4601 will drive 2Ω loads
safely without compromise in per-
formance.
Construction and Quality Control
The PL4601 is built exclusively in Crest’s own USA manufactur-
ing facility, with internal components selected for premium qual-
ity and proven durability. Each modular subassembly is pre-test-
ed, and the assembled PL4601 receives a rigorous “hot room”
burn-in before thorough final checkout on precision test equip-
ment.
PL4601 Features
• Crest’s legendary “overbuilt” power supply
• Toroidal power transformer
• Latest generation of high-speed, wide-bandwidth output
devices
• Twin tunnel cooling with back-to-front air flow
• Dual, variable speed DC fans
• Massive, extruded aluminum heat sinks
• Balanced XLR and 1/4-inch (TRS) inputs
• 5-Way Binding Post Outputs
• Stereo/parallel/bridged mono mode selector switch
• Ground lift switch
•
TourClass
®
protection circuits:
- ACL (Active Clip Limiting) prevents speaker damage with
gentle gain reduction at clip threshold.
- IGM (Instantaneous Gain Modulation) monitors speaker
loads to detect conditions that may overstress output
devices, allowing safe operation into nominal 2Ω imped-
ances.
- AutoRamp gradually increases gain to attenuator setting
level when amplifier is turned on.
- TourClass also includes comprehensive thermal manage-
ment, and short circuit, DC voltage, turn-on/off transient,
current inrush and sub/ultrasonic input protection.
• Input sensitivity selection
• Recessed, stepped attenuators
• Front panel circuit breaker switch
• Modular construction
• Three-year warranty
Power Specifications 8Ω Stereo 4Ω Stereo 2Ω Stereo 8Ω Bridged 4Ω Bridged
1kHz, 0.01% THD+N 250W 435W 500W 830W 1100W
20Hz-20kHz, 0.1% THD+N 245W 400W 450W 800W 900W
Figures are watts per channel, both channels driven.
4Ω Stereo PL3301 PL6001 PL7001 PL8001 PL9001
1kHz, .01% THD+N 250W 600W 900W 1200W 1800W
20Hz-20kHz, 0.1% THD+N 200W 500W 800W 1100W 1700W
Power Specifications:
Other PL Series Power Amplifiers
PL4601
POWER AMPLIFIER
To Next Page
Need help?
General
