Power Specifications 8Ω Stereo 4Ω Stereo 2Ω Stereo 8Ω Bridged 4Ω Bridged
1kHz, 0.01% THD+N 700W 1200W 1400W 2400W 2800W
20Hz-20kHz, 0.1% THD+N 650W 1100W 1100W 2200W 2200W
Figures are watts per channel, both channels driven.
Product Description
The Crest Audio PL8001 professional power amplifier is
designed to achieve unsurpassed sonic performance and long-
term reliability—even when operating under extreme stress—in
touring or fixed installation applications.
Absolute sonic accuracy is the hallmark of every Crest amplifier.
Bass is solid and defined to the limits of audibility, with ample
current reserves delivered by an “over-engineered” power supply
and advanced Class H circuitry. Wide-bandwidth output devices
assure detailed, transparent high frequency response. And, thanks
to Crest’s exclusive IGM circuit, the PL8001 will drive 2Ω loads
safely without compromise in performance.
Construction and Quality Control
The PL8001 is built exclusively in Crest’s own USA manufactur-
ing facility, with internal components selected for premium qual-
ity and proven durability. Each modular subassembly is pre-test-
ed, and the assembled PL8001 receives a rigorous “hot room”
burn-in before thorough final checkout on precision test equip-
ment.
PL8001 Features
• Crest’s legendary “overbuilt” power supply
• Toroidal power transformer
• Latest generation of high-speed,
wide-bandwidth output devices
• Twin tunnel cooling with back-to-front air flow
• Dual, variable speed DC fans
• Massive, extruded aluminum heat sinks
• Balanced XLR and 1/4-inch (TRS) inputs
• 5-Way Binding Post Outputs
•
Stereo/parallel/bridged
mono mode selector switch
• Ground lift switch
• TourClass
®
protection circuits:
- ACL (Active Clip Limiting) prevents speaker damage with
gentle gain reduction at clip threshold.
- IGM (Instantaneous Gain Modulation) monitors speaker
loads to detect conditions that may overstress output
devices, allowing safe operation into nominal 2Ω imped-
ances.
- AutoRamp gradually increases gain to attenuator setting
level when amplifier is turned on.
- TourClass also includes comprehensive thermal manage-
ment, and short circuit, DC voltage, turn-on/off transient,
current inrush and sub/ultrasonic input protection.
• Input sensitivity selection
• Recessed, stepped attenuators
• Front panel circuit breaker switch
• Modular construction
• Three-year warranty
4Ω Stereo PL3301 PL4601 PL6001 PL7001 PL9001
1kHz, .01% THD+N 250W 435W 600W 900W 1800W
20Hz-20kHz, 0.1% THD+N 200W 400W 500W 800W 1700W
Power Specifications:
Other PL Series Power Amplifiers
PL8001
POWER AMPLIFIER
To Next Page
Need help?
General
