Front panel features
TAPEIN level
On the rear panel there are Left and Right TAPEINconnectors, both 1/4”
TRSand RCA. They can be used to bring in a stereo source such as a two-track
playback from tape, CD, MD, or a sampler. This knob controls the level to the Aux
1/2 and Left/Right buses.
TAPEIN assignment
TOA1-2This assigns the stereo TAPEINto Auxes 1 and 2, which are con-
figured as a stereo pair. This is useful for stereo program monitoring.
TOL-RThis assigns the stereo TAPEINfeed to the Left and Right mix
buses. This is useful for in-between-set background music and as an extra stereo
return.
AUXOUT1-2 level control
This is the master stereo output level control for the AUX 1/2 pair.
Aux 1-2 AFL
This button assigns the AUX 1/2 stereo pair to the solo system. Since it is
AFL, the signal is monitored after the AUXinsert and master level control. Auxes
1 & 2 show up in stereo in the System - 1 on the left and 2 on the right.
AUX OUT 3, 4, 5 & 6 level controls
These are the master output level controls for Auxes 3, 4, 5 &6.
Aux 3, 4, 5, & 6 AFL
These buttons assign Auxes 3, 4, 5 & 6 to the solo system. Since they are
AFL, the signals are monitored after the AUXinserts and master level controls.
Master section
3
p.31
To Next Page
Loading...
