EasyManua.ls Logo

Crest Audio X-RACK XR-20 - Specifications

Crest Audio X-RACK XR-20
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
p.47
Specifications
4
Specifications
Frequency response +0/-1dB 20Hz-20kHz ref 1kHz
(any input to any output)
THD any output <0.01% THD 20Hz-20kHz@ +15dBu out
Noise mic ein: better than –128dBu 20Hz to 20kHz 150 ohm source, 60dB gain
Bus Noise: better than -85dBu
Crosstalk channel mute >90dB, channel routing >80dB
channel fader attenuation >90dB
aux send attenuation >85dB
Phase Shift < +/- 30 degrees, 20Hz to 20kHz – mic-in to main out
Mic-in XLR 4k ohm balanced
max voltage gain to main outs = 100dB
Line-in XLR and TRS >10k Ohms balanced
RCA tape input >10k Ohms unbalanced
Bus inputs >10k Ohms balanced
L/R/M outputs XLR 100 ohms balanced
(switchable between line or mic level)
Group/direct out TRS 50 ohms ground compensated
Aux outputs XLR & TRS 50 ohms gnd compensated
Headphones Stereo, Intended to drive > eight-ohms
Dimensions 17.5" in height (10u) x 19" in width x 4.5" in depth behind panel
Internal Power Supply 100 -240 VAC, 50/60 Hz
Warranty Five Years

Other manuals for Crest Audio X-RACK XR-20

Related product manuals