EasyManua.ls Logo

Crest Audio X-RACK XR-20 - Master Output Faders and Indicators

Crest Audio X-RACK XR-20
50 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Front panel features
Mono PK/SIGLED
Green/Red - Flashes to indicate the Mono master level. Green during nor-
mal operation and red to indicate overload either at the mix amp or at the fader.
Left/Right PK/SIGLED
Green/Red - Flashes to indicate the summed Left/Right master levels. Green
during normal operation and red to indicate overload either at the mix amps or
at the faders.
MONO AFL
Assigns the post-fader Mono master signal to Solo bus, and illuminates the
Peak (red) LED.
MONO, LEFT& RIGHT Master faders (100mm)
These are the master level controls for the main Left, Right and Mono outputs.
ALTOUT (L-R)
Sets the level for the Alternate Left & Right outputs. These outputs are
made up of the pre-fader Left/Right mix. If the ADD MONO TO PHONES & ALT
OUT button is depressed, the pre-fader MONOmix becomes part of the ALT
OUT as well. Jacks are located on the rear panel. 1/4” TRS and RCAjacks are
provided for easy hookup.
Master section
3
p.39

Other manuals for Crest Audio X-RACK XR-20

Related product manuals