Crest Audio X-VCA - Rear Panel Features

p. 41
stereo input module
2
rear panel features
The stereo line-input module provides connectors for three stereo line-level sig-
nals. see—line 2 switch.
balanced left and right line-in XLR connectors
These two jacks accept balanced or unbalanced +4dB line level sig-
nals.The
LINE 2 switch on front-panel must be disengaged for these connectors to
be active.
line-input left and right 1/4" TRS jacks
These two jacks accept balanced or unbalanced line level
signals.The LINE 2 switch on front panel must be engaged for these jacks to be
active.
line-input left and right RCA connectors
These two jacks accept unbalanced line-level signals.They are active when the LINE
2 switch on front-panel is engaged and nothing is plugged into the corresponding
left or right 1/4" TRS jack(s).