Crestron HD Streaming Receiver and Room Controller 100 - Status and Configuration; Viewing DM-RMC-100-STR Status Information

Supplemental Guide – DOC. 7846A DM-RMC-100-STR: HD Streaming Receiver
•
5
Status and Configuration
The web-based user interface of the DM-RMC-100-STR displays status information and
allows configuration of the following:
• Stream settings
• On-screen display settings
• HDMI output settings
• Network settings
• Device settings
Viewing DM-RMC-100-STR Status Information
General information, such as model name, serial number, and firmware version of the
DM-RMC-100-STR, can be viewed. The current network settings, such as host name and
IP address, can also be viewed.
To view status information, do the following: In the navigation bar, click
Status
. The Status
page opens.
NOTE:
The Status page opens after logging in to the DM-RMC-100-STR.
Sample Status Page
The Status page displays the following information about the DM-RMC-100-STR:
• General information, which consists of the following:
o Model, which is
DM-RMC-100-STR
o Serial Number
o Firmware Version