Quick Start Crestron Touchpanel Mounting
Pre-Construction Accessories
An accessory is necessary to compensate for minor and larger drywall cutout imperfections
realized after hanging drywall over a pre-construction option. To obtain a finished appearance
within a neatly trimmed cutout, use the Trim Mount Kit (or TMK). This kit is perfect for
wallpapering.
If the cutout made for the touchpanel is too large, use the Mud Mount Kit (or MMK). This kit
provides the appropriate framing needed to fill in the gap with additional plastering and
provide the support to hide large irregularities in the touchpanel cutout.
• Pre-Construction Accessory - Trim Mount Kit or TMK
TMK-2000L
TMK-1000L
TMK-3000L
• Pre-Construction Accessory - Mud Mount Kit or MMK
MMK-2000L
MMK-1000L
MMK-3000L
2 • Touchpanel Mounting Quick Start - DOC. 6140A
To Next Page
Loading...
Need help?
General
