Docking Stations Crestron TPS-6X-DS-C & TPS-6XNL-DS-C
Low Profile Base
Its sleek appearance belies a surefooted design offering excellent stability on any flat
surface. A single connector is provided at the rear of the base for connection of the
wall mount power pack (included). A swivel mount kit is also available for fixed
mount applications that require the ability to rotate the docking station during use.
Tilt Docking Port
The tiltable docking port on the TPS-6X-DS-C allows the touchpanel to be tilted at
any angle up to 45 degrees for optimal viewing and operation. The angle can be
freely adjusted during use or locked down at a fixed angle. Strong magnets help
guide the touchpanel onto the docking port and hold it in place.
Locking Option
The TPS-6X-DS-C is available with or without additional locking features. Standard
models include a finger-operated latch, which can be engaged at any time to secure
the touchpanel to the docking station while it is docked. The touchpanel can even be
attached to the docking station semi-permanently using a provided locking pin for a
full-time tabletop touchpanel solution. These locking features are omitted on the No
Lock model docking stations.
2 • Docking Stations for the TPS-6X: TPS-6X-DS-C & TPS-6XNL-DS-C Operations Guide – DOC. 6878B
To Next Page
Loading...
Need help?
General
