ETHOS
7
1.5.1 To be arranged by the Customer
Provided for otherwise by special contractual conditions, the Customer is responsible for
arranging the following:
• selecting the people to whom the training on the product use is addressed;
• arranging a suitable place for product installation;
• checking that the received product corresponds to the order specifications;
• carrying out all the activities described in the present manual, except where expressly indicated
otherwise.
1.5.2 Technical assistance
The Customer may require technical assistance by contacting directly the Dealer’s Customer Service
according to the ways specified in the Sales Agreement.
1.5.3 Spare parts
Drawing, references, descriptions and serial numbers for the identification of all the mechanical parts
are listed in the section Spare Parts.
With regard to the electrical and electronic equipment, please refer to the electrical diagrams 1 and 2.
Note!
It is strictly forbidden to use them to carry out modifications on the product.
Possible modifications are to be required directly to the Dealer, specifying all
the product technical features and the reasons for such modifications; if
approved, modifications must be carried out only by the Manufacturer’s
personnel or by authorised personnel.
Note!
Any non-authorised tampering/replacement of one or more parts or units of the
product may cause accidents and exempt the Manufacturer from civil and
criminal liability.
Note!
The Customer must always use original spare parts supplied by the Manufacturer.
The Manufacturer cannot be held responsible for any damage or injury or any other in-
convenience arising from the use of non-original spare parts.
Note!
When ordering new spare parts, always quote the model and serial number of
the product for which the spare parts are required.
To Next Page
Loading...