To Next PageTo Next Page
Need help?Do you have a question about the Cristec CPS2 OEM 12V/60A and is the answer not in the manual?
Measures to ensure proper air circulation and prevent overheating of the appliance.
Location guidelines to prevent damage from damp, liquids, salt, and dust.
Requirements for earthing the charger and protection against leakage currents.
Recommendation for lightning arrestor installation in exposed areas.
Instructions on not modifying the case or performing unstated actions.
Covers warranty period, what it includes, and exclusions.
Input, output, environmental, and case specifications of the charger.
Explains the high-frequency split converter and automatic operation.
Details the purpose of switches for configuration and boost function.
Table detailing voltage settings for different battery types and boost configurations.
Describes factory settings and installer adjustments using potentiometers.
Illustrates and explains IUoU (Boost, Absorption, Floating) and UI charge curves.
Explains the meaning of green 'ON' and yellow 'Boost/Floating' indicator lights.
Recommendations for charger placement for ventilation, damp-proofing, and dust-free environment.
Details AC input and battery connection procedures and cable requirements.
Guidelines for using shielded cables and minimizing electromagnetic interference.
Notes on operating with single-phase networks and generators.
Ensuring voltage and settings match connected batteries before startup.
Procedure for powering the charger on and off.
Instructions for regular checks, cleaning, and periodic inspections.
Procedures for repairs, including fuse replacement and contacting support.
Lists compliance standards for equipment and installation.
Safety measures for installers and users during installation and operation.
Measures to prevent fire and explosion risks, especially near batteries.
Statement of compliance with EU directives and harmonized standards, with signatures.
Explains the function of various components like fuses, switches, and LEDs.
General| Output Voltage | 12V DC |
|---|---|
| Output Current | 60A |
| Cooling | Forced Ventilation |
| Number of Outputs | 3 |
| Battery Type | Lead Acid, Gel, AGM |
| Charging Stages | 3 |
| Operating Temperature | -10°C to +50°C |
| Protection Features | Overload, Short Circuit, Over Temperature |
