Cristec YPOWER 12V/25A

Need help?

Do you have a question about the Cristec YPOWER 12V/25A and is the answer not in the manual?

Summary

Safety Precautions and Warranty Information

General Safety and Installation Standards

Safety precautions & installation standards (NFC 15-100, ISO 13297).

Electric Shock Hazard Warning

Warning about risk of electric shock and death when interfering with a live charger.

Accidental Earth Leak Safety Measures

Requirements for earthing PE terminal & using 30mA differential circuit-breaker.

Lightning Protection Recommendations

Appliance Overheating Prevention

Importance of 150mm clearance for ventilation and avoiding heat sources.

Protecting Against Dust and Moisture

Flammable Material and Ignition Safety

Avoids use near flammables; ensures ventilation; details ignition protection.

CRISTEC Product Warranty Details

Details warranty terms, coverage, and exclusions for CRISTEC equipment.

Installation and Wiring Procedures

General Wiring Guidelines

AC Power Supply and Generator Connection

Battery Cable Selection and Connection

Instructions for battery polarity/voltage checks & selecting correct cable cross-sections.

EMC Precautions for Cabling

Switches, Settings, and Indicators

DIP Switch Functions and Charging Modes

Explains DIP switch usage for battery type/application and BOOST/REFRESH modes.

Battery Type Configuration Settings

Table of switch settings for battery types, voltages, and durations.

Temperature Compensation with Probe

Factory Default Switch Settings

Understanding the Charging Curve

Interpreting LED Status Indicators