Need help?Do you have a question about the Cristec YPOWER 12V-24V/30A and is the answer not in the manual?
Safety provisions related to appliance installation, handling, and electrical shock hazards.
Explains the high-frequency converter's function in transforming 12V to 24V DC for battery charging.
Describes the charger's two zones: user interface and energy conversion, and fixing details.
Details the layout of switches, fuses, and connection terminals on the user interface.
Provides physical dimensions and placement instructions for the charger.
Instructions for connecting battery cables, including polarity and cross-section requirements.
Recommendations for cable routing, shielding, and separation to minimize EMC issues.
Explains the function of switches for configuring battery type and charging modes.
Details switch settings for various battery types, including voltage and duration parameters.
Explains how the optional STP-NEW-2.8 probe compensates voltage based on ambient temperature.
Specifies the default factory settings for battery type and charging modes.
Illustrates and explains the 5-step charging curve (BOOST, ABSORPTION, FLOATING, REFRESH, REBOOST).
Describes the function of the LED indicators for monitoring charger status.
Introduces the section on maintenance and repairs, emphasizing compliance.
Provides instructions for regular cleaning, checks, and tightening of fasteners.
Outlines procedures for fuse replacement and seeking professional repair services.
General| Output Current | 30A |
|---|---|
| Number of Outputs | 3 |
| Category | Battery Charger |
| Output Voltage | 12V/24V |
| Charging Type | IUoU 3-stage charging |
| Protection Features | Short circuit, Overload |
| Cooling | Fan |
To Next Page