9. Place the door back on. Ensure
the door is aligned horizontally and
vertically so that the seals are closed
on all sides before nally tightening
the top hinge.
10. Insert the hinge bracket and screw it
to the top of the unit.
11. Use a spanner to tighten it if necessary.
12. Put the hinge cover and the screw
cover back.
13. With the door closed, check that
the door is aligned horizontally and
vertically and that the seals are
closed on all sides before nally
tightening the bottom hinge. Re-
adjust the leveling feet as needed.
To Next Page
Loading...
