Criterion CIR30B1S - Child Lock Function

16
To Bake with the oven in Sabbath Mode:
1. Turn Sabbath Mode on per instructions above.
2. Touch & hold the <Bake> icon for 3 seconds.
3. Enter the desired oven temperature by inputting temperature value on numeric keypad on
control panel.
4. After Sabbath Mode <Bake> function is enabled and desired temperature is set, you will have
the option to set “Cook Time” and/or a “Start Time” prior to touching <Start>.
5. Optional: To set cook time while in Sabbath Mode, touch <Cook Time>. The time display --:--
will appear and blink. Input the desired cook time by touching the corresponding number keys
on the control interface. After the desired cook time is set, the system prompts you to either
start the operation immediately or to delay start. To immediately start oven “Bake” function,
touch <Start>.
Optional: To delay the start of oven <Bake> function while in Sabbath Mode, touch <Delay
Start>. Time displayed on interface will be the current clock time. Set desired start time by
touching the number keys corresponding to the desired cook time on the control panel interface.
Note: delay start time is the time that the oven will start. After setting the desired delay start
time, touch the <Start> icon. In Sabbath Mode the countdown clock will not be displayed on
control panel.
Note: At this time the oven is in Sabbath Mode with only the <Bake> function “On”. The oven will
power “On” at the selected delayed start time at the pre-selected cook temperature and remain on
until Sabbath Mode is turned “O”.
6. Child Lock Function
This range is equipped with “Child Lock” feature whereby the control panel
can be locked and disabled so that children cannot turn on any cooktop or oven functions. To
enable the “Child Lock” follow the instructions below:
1. To enable the “Child Lock” function with the oven in standby mode, touch and hold the <Start>
icon for (3) seconds. The control panel will emit a conrmation tone conrming that the child lock
has been enabled. The control panel is now locked. In this mode, only the <Start> icon on the
control panel is operational. All other icons are locked and inactive. When other icons on the
control panel are touched, the “Child Lock” icon will illuminate and blink and at the same time the
control panel will emit an “invalid” tone. To disable the “Child Lock”, touch and hold the <Start>
icon for (3) seconds. “Child Lock” will be disengaged.
2. To enable the “Child Lock” function when the range is on and in “working” mode, touch and hold
the <Start> icon for (3) seconds. The control panel will emit a conrmation tone conrming that
! IMPORTANT !