EasyManua.ls Logo

Criterion CUF36C1W - Installation Warnings; During Usage

Default Icon
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN - 9
1.2 Installation warnings
Before using your freezer for the first time,
please pay attention to the following points:
 The operating voltage for your freezer is
115-127 V at 60Hz.
 The plug must be accessible after
installation.
 Your freezer may have an odour when
it is operated for the first time. This is
normal and the odour will fade when your
freezer starts to cool.
 Before connecting your freezer, ensure
that the information on the data plate
(voltage and connected load) matches
that of the mains electricity supply. If in
doubt, consult a qualified electrician.
 Insert the plug into a socket with an
efficient ground connection. If the socket
has no ground contact or the plug does
not match, we recommend you consult a
qualified electrician for assistance.
 The appliance must be connected
with a properly installed fused socket.
The power supply (AC) and voltage at
the operating point must match with
the details on the name plate of the
appliance (the name plate is located on
the inside left of the appliance).
 We do not accept responsibility for any
damages that occur due to ungrounded
usage.
 Place your freezer where it will not be
H[SRVHGWRGLUHFWVXQOLJKW
 Your freezer must never be used
RXWGRRUVRUH[SRVHGWRUDLQ
 Your appliance must be at least 20 inch
away from stoves, gas ovens and heater
cores, and at least 2 inch away from
electrical ovens.
 ,I\RXUIUHH]HULVSODFHGQH[WWRDGHHS
freezer, there must be at least 1 inch
between them to prevent humidity
forming on the outer surface.
 Do not cover the body or top of freezer
with lace. This will affect the performance
of your freezer.
 Clearance of at least 6 inch mm is
required at the top of your appliance.
Do not place anything on top of your
appliance.
 Do not place heavy items on the
appliance.
 Clean the appliance thoroughly before
use (see Cleaning and Maintenance).
 Before using your freezer, wipe all parts
with a solution of warm water and a
teaspoon of sodium bicarbonate. Then,
rinse with clean water and dry. Return all
parts to the freezer after cleaning.
 Use the adjustable front legs to make
sure your appliance is level and stable.
You can adjust the legs by turning them
in either direction. This must be done
before placing food in the appliance.
 Install the two plastic distance guides (the
parts on the black vanes
-condenser- at the rear)
by turning it 90° (as
shown in the figure) to
prevent the condenser
from touching the wall.
 The distance between
the appliance and back wall must be a
PD[LPXPRI3 inch.
1.3 During Usage
 Do not connect your freezer to the mains
HOHFWULFLW\VXSSO\XVLQJDQH[WHQVLRQOHDG
 Do not use damaged, torn or old plugs.
 Do not pull, bend or damage the cord.
 Do not use plug adapter.
 This appliance is designed for use by
adults. Do not allow children to play with
the appliance or hang off the door.
 1HYHUWRXFKWKHSRZHUFRUGSOXJZLWKZHW
hands. This may cause a short circuit or
electric shock.
 Do not place glass bottles or cans in
your freezer as they will burst when the
contents freeze.
 'RQRWSODFHH[SORVLYHRUIODPPDEOH
material in your freezer.

Related product manuals