EN - 11
2 DESCRIPTION OF THE
APPLIANCE
1
2
3
4
5
This presentation is only for
information about the parts of the
appliance. Parts may vary according to the
appliance model.
1) Thermostat knob
3) Levelling feet
2)
Freezer glass shelves
4) Ice box tray
5) Plastic ice scraper *
* In some models
About freezer glass shelves: When the
freezer is unpacked, both two of the freezer
glass shelves may be in the lower freezer
shelf position. In this situation, remove the
bigger shelf and place it on the upper shelf
position.
3 USING THE APPLIANCE
3.1 Information on Less Frost
Technology
Thanks to the wrap around evaporator,
Less Frost technology offers more efficient
cooling, less manual defrost requirement,
and more flexible storage room.
3.2 Thermostat Setting
The thermostat automatically regulates the
temperature inside the cooler and freezer
compartments. Refrigerator temperatures
can be obtained by rotating the knob
to higher numbers; 1 to 3, 1 to 5 or SF
(Maximum numbers on the thermostat
depends on your product.)
Important note: Do not try to rotate
the knob beyond position 1, it will stop
your appliance from working.
Thermostat knob
Thermostat Settings
1: For short-term storage of food
2: For long-term storage of food
3 : Maximum cooling position. The
appliance will work longer.If required,
change the temperature setting.
3.3 Temperature Settings Warnings
• Your appliance is designed to operate in
the ambient temperature ranges stated
in the standards, according to the climate
class stated in the information label. It
is not recommended that your fridge is
operated in the environments which are
To Next Page
Loading...
