Crivit 353797 2010 - Page 30

30
CO2 KG: CO2 saved�
• Press and hold the ‘SET’ button (21) for three seconds
and press the ‘SET’ button (21) again to open the
reference value of the CO2 setting�
FUELSAVE: fuel saved compared to a car�
• Press and hold the ‘SET’ button (21) for three seconds
and press the ‘SET’ button (21) again to open the
setting for the unit and reference value of the fuel
consumption�
ETASTART: estimated time of arrival
• The display shows ETASTART: press the ‘SET’ (21) and
‘MODE’ buttons (15) to activate the ETA function�
• Press and hold the ‘SET’ button (21) for three seconds
to change the ETA distance or ETA mode�
KM +/-: kilometre counter
• Press and hold the ‘SET’ button (21) for three seconds
and press the ‘SET’ button (21) again to pull up the
kilometre counter settings� The display shows the
symbols for increasing and decreasing the number
(+ or -) and the distance value�
TIME +/-: timer�
• Press and hold the ‘SET’ button (21) for three seconds
to change the timer settings� The display shows the
symbols for increasing and decreasing the number
(+ or -) and the timer value�
SCAN: scan
GB