Crivit 353797 2010 - Page 34

34
Problem Solution
Blank display or no
response after reinserting
the battery
RESET
Remove the battery�
Bridge the two contacts
with a metallic object
(e�g� screwdriver)� Insert
the 3V battery into the
battery compartment
so that the + pole is
pointing upwards� Place
the battery compartment
cover on the battery
compartment� The
microprocessor is reset
and restarted�
No ride speed or
kilometre display
• Properly align the
magnet and sensor�
• Check whether the
battery’s poles are
correctly aligned�
GB