53
STEP 1
WARNING!
Due to its size, the trampoline must be assembled and installed by at least two adults.
WARNING!
Wear protective gloves when assembling the trampoline and make sure that you are working deliberately and care-
fully. Make sure that you do not get caught in any parts! There is a risk of injury!
1. Place the frame poles (1) on the ground with the openings facing upwards.
2. Connect the frame poles (1) in succession such that the opening of the leg sleeve of the connector (1a) is point-
ing downwards.
STEP 2
1. Connect the frame poles (1) to create a closed circle.
Note
The ends of the frame poles (1) must be completely inside the connector (1a).
STEP 3
1. Connect one bracket pole (2) and two extension poles (5) to create one foot; repeat until you have made four
feet.
Note
They must CLICK audibly when being fastened. The pin of the bracket pole (2) is then correctly locked into the pin
hole of the extension pole (5).
STEP 4
1. Insert the ends of the four feet into the leg sleeves of the frame poles (1).
3. ASSEMBLING THE BASE FRAME
GB
To Next Page
Loading...
