16 GB/IE
• The helmet is designed to absorb the energy
of a blow or a collision by destroying some
of its components. In case of a further blow it
wouldn’t protect you any longer. After an acci-
dent, the helmet must be replaced even though
it doesn’t show external damages.
• Refrain from transporting your helmet by hang-
ing it onto any part of your motorcycle. Keep it
away from exhaust pipes and other sources of
heat.
• Never clean the helmet with solvents contain-
ing petroleum or scouring agents, neither the
outside nor the inside.
Always use pH-neutral detergent dissolved
in clean water. Careful rub with a soft cloth.
Thenwipe dry with a lint-free cloth.
The pad may be cleaned with a little soap
using a soft brush.
• Only use genuine spare parts for your helmet.
• Only use the sun shield in daylight! Never use
at twilight or at night.
Product Characteristics
ECE-R 22.05 Homologation
This helmet is in compliance
with ECE-R 22.05 standards
and is homologised accord-
ingly. TheECE-R 22.05 standard
consists of uniform conditions for
the approval of protective helmets and its visors
for drivers and passengers of motorcycles and
mopeds. The basic principles for these tests are
the so called ECE-Regulations of the Economic
Commission for Europe.
Significant Tests of the
ECE-Regulation 22.05
• Shock absorbance
• Dynamic test of wear features
• Field of vision test
• Design strength
• Sustainability test (Strip-off test)
• Chin straps and lock test
• Shear test for outside edges
• Friction performance test of the outer shell
• Visor test
(mechanical and visual characteristics)
• Chin bar, chin part damping test
Voluntary product testing
Emission certificate
The TÜV Rheinland emission certificate indicates
products tested for contaminants and according
to current knowledge pose no risks to the health.
Inside Padding with
Coolmax
®
Inserts
Coolmax
®
by INVISTA is a
high-performance fabric fibre
that supports its wearers during sport activities.
Based on the patented DuPont-fibre technology,
Coolmax
®
transports moisture from the body to
the fabric surface where it dries quicker than with
any other fabric.
The specially developed fibres of INVISTA that
are used for Coolmax
®
-fabrics transport the mois-
ture away from the body to the surface of the
fabric where it has the opportunity to evaporate
quickly. At the same time, the uniquely formed
fibres offer maximum breathing activity, even in
wet conditions. In addition, the breathing activity
improves the heat regulating effect.
Cheeks, forehead and neck pads of this article
are equipped with Coolmax
®
.
HeiQ
®
Pure dynamiq
PURE Textile freshness
Experience the feeling of lasting
freshness through the power of
silver, keeping you odour-free all
day long.
ADAPTIVE Thermal control
Feel good all over. The textile will cool you down
when you’re hot, and keep you dry longer in cold
weather. Cools and minimises perspiration.
The helmet liner contains a biocide agent
(PURETF by HeiQ
®
) for an anti-bacterial, odour-
inhibiting lining treatment. Active ingredient: silver
adsorbed to silicon dioxide (nano).
Breath deflector and visor
ventilation
The breath deflector (7) de-
creases fogging of the visor
due to exhaled air. Addition-
ally, the air circulation in the
visor area is improved.
To Next Page
Loading...
Need help?
General
