Crivit SP-11 - Page 6

6
function.
• The helmet may not be changed to make any additions which are not recommended
by the manufacturer.
• High temperatures from 60° C can seriously damage the helmet. Uneven helmet
surfaces and air bubbles are signs of this kind of damage.
• Do not store behind glass panes e.g. in the car or near heat sources.
• Ensure that the helmet battery is always charged with a micro USB cable.
• Please be aware that the indicator function on the helmet to indicate a change in
direction does not replace manual hand signals.
• Check before each use that the back light and indicator light functions work in
combination with the remote controls.
User information
1. Correct helmet position
• The helmet must always sit horizontally on your head. (Fig. A)
• If the helmet is too far forward, this can impair your vision.
• If the helmet is too far back, your forehead is not sufciently protected. (Fig. B)
2. Operating the one-handed size adjustment system
The integrated size adjustment system (Fig. C) can be adjusted freely with a turning knob on
the back of the head:
• smaller = turn to the right • larger = turn to the left
3. Adjusting the strap divider
• Open the strap divider. (Fig. E)
• The strap divider must be positioned in such a way that the straps are tight but
comfortable. The strap divider must be placed under the ears; the straps should not
cover the ears.
• Close the strap divider. (Fig. D)
An open strap divider can lead to the helmet slipping during an
accidentandthuslosingitsefcacy!!!
Smart Bicycle Helmet SP-106